Roofing Debris Removal in Covington, GA
Shingles are priced by weight, not volume, and that single fact catches out more roofing customers than anything else in this business. A container that looks a third full can already be at its tonnage limit.
Why roofing is a weight job
A square of standard architectural shingles weighs somewhere in the region of 230 to 250 pounds. Three layers coming off a mid-sized Covington house will approach the tonnage allowance on a 20 yard while the container still looks like it has plenty of space above the load.
That is not a trick and it is not us being awkward. It is what the scale says at the disposal facility, and the ticket is available to you.
So when you call, the useful information is not how big the roof looks. It is the square footage and, critically, how many layers are coming off. Give us those two numbers and the size recommendation will be right.
Placement close to the drop zone
Roofing crews work faster when the container is directly below the tear-off rather than across a yard. We place as close to the eaves as the ground and the approach allow.
Low-wall containers make a real difference on roofing work because the crew is throwing material down into them rather than lifting it up over a high rim. Ask for the low-wall option when you book.
We will discuss protecting landscaping and gutters at placement. Shingles thrown from height do not always land where intended and a sheet of plywood in the right place saves a shrub.
Georgia weather and roofing schedules
Summer storm season drives the roofing calendar here, and when a hail line goes through Newton County the whole trade books out within days. If you are planning a re-roof rather than reacting to damage, booking outside that window gets you a better slot.
Heat matters as well. Asphalt shingles soften considerably on a July afternoon and crews often start at first light. We will schedule delivery for the evening before so the container is in place when the crew arrives rather than mid-morning.
Wet shingles weigh appreciably more than dry ones. If a tear-off gets rained on before pickup, the tonnage climbs, which is another reason to keep the rental short on roofing work.
Nails, underlay and everything else that comes off
Underlay, felt, flashing, ridge vents and old decking all go in with the shingles. The container takes the lot.
Nails are the thing that outlasts the job. A magnetic sweep of the driveway and yard afterwards is worth doing regardless of how careful the crew was, and any decent roofer will do it as standard.
If a tear-off exposes anything that might contain asbestos, particularly on older properties, stop and get it tested. That material cannot go in a roll-off and cannot be handled as ordinary debris.
Where we provide this service
We deliver roofing debris removal across Covington and throughout Newton County, plus the surrounding towns in Rockdale, Walton, Morgan, Jasper and DeKalb counties.
Book roofing debris removal in Covington
One call gets you a flat rate, an honest size recommendation and a delivery slot.
(470) 327-9027Roofing Debris Removal: common questions
What size dumpster for a roof tear-off?
Give us the square footage and the number of layers coming off and we will tell you exactly. As a rough guide, a single layer on an average home suits a 15 yard and multiple layers usually mean a 20, with the caveat that weight rather than space will be the limit.
Why is my roofing container full at a third of its height?
Because shingles are dense. The container reached its tonnage allowance rather than its volume. It is the normal outcome on roofing work and the scale ticket will confirm it.
Can the container go right next to the house?
Usually, and it makes the crew significantly faster. The limits are the truck's approach and overhead clearance, so tell us where you want it and we will tell you honestly whether it can be done.
Do you take the old decking as well?
Yes. Decking, underlay, felt, flashing and vents all go in with the shingles. Anything suspected of containing asbestos does not and needs testing first.